Products

Engine Mounted

VR70

High performance, lightweight, under-chassis mounted, engine-driven air compressor systems. Designed for mobile tyre inflation, utilities, and mobile servicing applications

Demonstration

For further information or to arrange a no obligation demonstration please call +44(0) 1743 443176

Overview

VMAC VR70 On Vehicle PowerEngine Mounted VR70

Techni’s mobile compressed air systems are the best choice for customers who need to save load space, reduce gross vehicle weight, increase payload, and minimize maintenance requirements.

All Techni VMAC systems feature a patented rotary screw air compressor that includes a VMAC Lifetime Warranty2.

Techni’s VMAC VR70 is the most powerful, lightweight, engine mounted, belt driven compressor available. A mobile compressed air system that delivers immediate, on-demand compressed air at the touch of a button. With the vehicle engine at operating temperature, press the start button, and within seconds Techni’s VMAC VR70 is ready to deliver an air flow up to a huge 70 cfm1(cubic feet per minute) and a pressure up to 175 psi. Factory-set, built-in controls match the vehicle’s rpm to specific requirements to ensure smooth and economic operation, with reduced fuel consumption, wear and noise level.

Techni’s VMAC VR70 air compressor system leaves zero footprint inside the vehicle body. The compressor is engine mounted with oil separator, oil cooler and air cooler chassis mounted. No space inside the van is sacrificed; this provides maximum area in the rear of the van for your payload. The engineered design also improves access for servicing, decreasing downtime in the workshop thus increasing productivity and profitability.

We stand by our products and as such offer a lifetime warranty* on our on board power compressed air products. Is your current supplier as confident?

1Vehicle dependant

2Terms and Conditions apply

Specification

COMPRESSOR OUTPUT Upto 70 CFM / 1982.18LPM / 118.93M3H
OPERATING VOLTAGE 12V

ENGINE OPERATING SPEED 1000-2500 RPM

PRESSURE OUTPUT Upto 12 BAR, 175 PSI

ENGINE MOUNTED YES

POWER SOURCE POLYVEE DRIVE BELT

ENGAGEMENT ELECTROMAGNETIC CLUTCH
SYSTEM WEIGHT 73KG / 162.2LB
   
OIL CAPACITY 7.0L

OIL SEPARATOR BSEN286 PT1

OIL CARRYOVER 2PPM

OIL FILTER SPIN-ON

OPERATING TEMPERATURE -48°C - +40°C

HEALTH AND SAFETY REMOTE START/STOP FACILITY

  OVER PRESSURE
  OVER TEMPERATURE SHUT OFF
  HANDBRAKE PROTECTION
  AUTOMATIC BLOWDOWN

Benefits

100% Duty Cycle – Maximise Productivity

Providing a continuous high volume of air to run a wide variety of pneumatic tools including impact wrenches, grinders, road breakers, air guns, moles and post pounders. No waiting around for air reservoir tanks to fill, the air is instant, on demand and continuous.

Easy to Operate

With the engine idling and the handbrake applied, simply press the on/off    switch and the compressor is engaged. Once on, the vehicle engine rpm will increase and the VMAC rotary screw compressor delivers a continuous, flow of air to your tools, on demand.

Premature Tool Failure and Performance

The Techni VMAC VR70 system has an in-built fully automatic aftercooler. Cooling the air assists the FRL (Filter Regulator Lubricator) assembly remove water from the air which prevents premature tool failure and tool freeze up.

Cost Saving

The in-built after cooler makes redundant the expense of high temperature rated FRL’s. As the compressed air temperature is now reduced a typical FRL with a 50’C rating can be installed.

Water Drop-Out units (which do not function at high temperatures) are no longer needed.

Frequently changed desiccant packs are also made redundant

Free up 25 cubic feet

Techni’s VR70 mobile compressed air system can free up to 25 cubic feet of space because the air compressor mounts in the engine compartment.  In fact, no components get installed in the vehicle load space which ensures a clean, efficient and professional looking vehicle, leaving space for other equipment, tools or materials.

Reduce truck GVW by up to 115kgs

Techni’s VR70 mobile compressed air system can reduce your gross vehicle weight by as much as 115kgs. There is no heavy secondary engine to carry around or large air reservoir tank.  Less weight means you can carry more, or take advantage of improved fuel economy.  For every 45kgs of weight saving on a vehicle, you can reduce fuel consumption by up to 2%3.

3 Source EPA ……..

Avoid frustrating breakdowns and maintenance issues

Techni VR range of compressed air systems are powered by the vehicle’s engine.  Because they don’t have their own engine that needs constant maintenance, less time and money is spent on fixing engine issues and more time is spent increasing profitability.

Work in any climate

Techni VMAC products have been designed and have a proven track record in the harshest environments. Extreme cold to blistering heat the VR70 is engineered to work where you do.

Videos

VMAC VR70 On Vehicle Power  VR70 3D Cad

Downloads

VMAC VR70 On Vehicle Power  VR70 Product Brochure

VMAC VR70 On Vehicle Power  VR70 Why Buy Guide


Engine Mounted VR40

High performance, lightweight, under-chassis mounted, engine-driven air compressor systems. Designed for mobile tyre inflation and mobile servicing applications.

DEMONSTRATION

For further information or to arrange a no obligation demonstration please call +44(0) 1743 443176

Overview

VMAC Original VR40 lite On board power 40cfmEngine Mounted VR40

The Techni VR40 rotary screw air compressor system is the ultimate solution for vans and operators who use small air tools for light duty applications. Ideal for mobile tyre fitting and service vehicles.

An extremely light compressor at under 40kg with a cycling functionality means that the system is only on when you use it.

Saving you money with decreased fuel consumption!

Specification

Air Compressor Up to 40 CFM, upto 175 psi, 100% duty cycle, VMAC rotary screw oil-injected, belt driven
Weight (wet) 85lbs (38.5kg)
WHASP Tank ·       Combined air/oil cooler, air/oil separator tank

·       (44.5 cm (l) x 20.3 cm (w) x 50.2 cm (h))

Display Box ·       Easy to read hour meter
Safety Features ·       Electric clutch

·       Compressor thermal protection circuit

·       Automatic rapid blow-down on shut-down

·       200 psi pressure relief valve

·       Handbrake brake must be engaged and van must be in park for system to start

Air Receiver Tank (recommended, not included) Minimum 22Ltr Air Receiver Tank - Recommended for best performance

Benefits

Free up to 10 cubic feet

Techni's 40 CFM air compressors can free up to 10 cubic feet in loadspace because the air compressor mounts in the engine compartment. The only space required is 1.7 cubic feet in the rear of the van for a combined air/oil cooler and separator tank. Alternatively, the chassis mounted air/oil separator maybe fitted which provides 100% payload area footprint.

Reduce Gross Vehicle Weight by up to 132Kgs

Techni’s VR40 air compressors reduce van GVW by as much as 132Kgs. Less weight means you can carry more, or simply take advantage of improved fuel economy.

Maximise productivity with up to 40 CFM, 100% of the time

Techni's 40 CFM air compressors use patented rotary screw technology designed to run at 100% duty cycle without stopping, so operators don’t have to wait for their air compressor to fill up an air receiver tank.

Eliminate common safety issues

Techni's air compressors are the only 40 CFM air compressors specifically engineered to eliminate safety hazards that van operators face including lifting injuries, toxic fume exposure and gas fires inside the cargo area

Videos

Coming Soon...

Downloads

VMAC Original VR40 lite On board power 40cfm  VR40 Mercedes Sprinter Product Brochure

VMAC Original VR40 lite On board power 40cfm  VR40 Renault Master Product Brochure

VMAC Original VR40 lite On board power 40cfm  VR40 Nissan NV400 Product Brochure

Hydraulic

VMAC’s Hydraulic Driven air compressor is the best choice for customers looking for a compact, powerful and lightweight hydraulic driven air compressor that can operate in any climate.

The air compressor comes with the most advanced control system available, with easy to use digital controls that extend compressor life by automatically protecting it in extreme environments. VMAC’s hydraulic powered rotary screw compressor produces 25 to 60 CFM and is designed to run continuously or intermittently.

All systems feature the patented VMAC rotary screw air compressor which includes the VMAC Lifetime Warranty.

With VMAC Hydraulic air compressors, you can choose the model that best works for your application.


Hydraulic 40CFM

Overview

Hydraulic Driven mobile Air Compressor 40cfm and 60cfm

Hydraulic 40 CFM

The 40 CFM VMAC Hydraulic air compressor is the best choice for customers requiring hydraulic-powered compressed air and want better performance than what they are getting out of their current reciprocating air compressor. Quick and easy, save time and money.

The powerful rotary screw air compressor is ideal for operating small to medium sized air tools. The compact design allows it to fit on most vehicles and specialty equipment with limited available space.

Applications – Jobs that require a mobile compressed air system:

  • Mobile heavy duty mechanics
  • Mobile tyre service technicians
  • 24/7 roadside repair technicians
  • Light to medium duty lube trucks
  • Rail

Specification

Air Compressor:

25-40 CFM and up to 150 psi, 100% duty cycle, VMAC oil-injected rotary screw, direct driven

Hydraulic Flow Required:

34-46 LPM (9-12GPM); open centre hydraulic circuit

Hydraulic Pressure at Full Load:

162 bar (2345psi); 207 bar (3000psi) hydraulic pump is recommended

Weight (dry):

Approximately 68 kgs (150lbs)

Dimensions:

61.0 cm (l) x 41.9 cm (w) x 45.7 cm (h)

Cooler:

Integrated hydraulic / compressor oil cooler

Hydraulic Connections:

# 12 ORB Inlet, # 16 ORB Outlet

Controls:

LCD digital control box with hour meter, service reminders, and error messages.

Live monitoring of air pressure, hydraulic and compressor temperatures.

Automatic cold climate protection.

Automatic warm-up mode extends system life.

Standby Mode, turns system off and on depending on air use.

Safety System:

Compressor over-temp sensor

Hydraulic overheat protection

Overpressure shutdown

Automatic rapid blow-down valve on tank

200 psi pressure relief valve

Air Receiver Tank (recommended, not included):

Minimum 22ltr Air Receiver Tank - Recommended for proper operation of all functions.

Benefits

Free up to 6 cubic feet

VMAC Hydraulic 40 CFM air compressors free up to 6 cubic feet on the vehicle. Systems are designed and engineered to be compact for service vehicles and applications where space is limited.

Reduce truck GVW by up to 118kgs

VMAC Hydraulic 40 CFM air compressors reduce GVW by as much as 118kgs. This is because VMAC designs systems with lightweight materials and integrated components. Less weight means you can carry more, while improving your fuel economy.

Maximize productivity with up to 40 CFM, 100% of the time

VMAC Hydraulic 40 CFM air compressors use patented rotary screw technology that can operate intermittently for smaller jobs, but are designed to run at 100% duty cycle without stopping, so operators don’t have to wait for their air compressor to fill up an air receiver tank. This maximises tool performance and eliminates downtime by keeping operators working

Videos

Videos coming soon.

Downloads

Hydraulic Driven mobile Air Compressor 40cfm and 60cfm   Hydraulic HD40 Brochure


Hydraulic 60CFM

Overview

Hydraulic Driven mobile Air Compressor 40cfm and 60cfm

Hydraulic 60 CFM

The 60 CFM VMAC Hydraulic air compressor is the best choice for customers requiring hydraulic-powered compressed air for continuous duty applications and tools. Ideal for medium to heavy duty size vehicles and operating small to medium sized air tools like a 1” impact wrenches, 60lb jackhammers, backfill tampers, vertical/horizontal grinders and sanders.

Specification

Air Compressor:

40-60 CFM and up to 150 psi, 100% duty cycle, VMAC oil-injected rotary screw, direct driven

Hydraulic Flow Required:

53-80 LPM 14-21 GPM (14-21 GPM); open centre hydraulic circuit

Hydraulic Pressure at Full Load:

169 bar 2,450 psi (2450 psi); 207 bar 3,000 psi (3000 psi) hydraulic pump is recommended

Weight (dry):

Approximately 73kgs (160 lbs)

Dimensions:

61.0 cm (l) x 41.9 cm (w) x 45.7 cm (h)

Cooler:

Integrated hydraulic / compressor oil cooler

Hydraulic Connections:

# 12 ORB Inlet, # 16 ORB Outlet

Controls:

·       LCD digital control box with hour meter, service reminders, and error messages.

·       Live monitoring of air pressure, hydraulic and compressor temperatures.

·       Automatic cold climate protection.

·       Automatic warm-up mode extends system life.

·       Standby Mode, turns system off and on depending on air use.

Safety System:

·       Compressor over-temp sensor

·       Hydraulic overheat protection

·       Overpressure shutdown

·       Automatic rapid blow-down valve on tank

·       200 psi pressure relief valve

Air Receiver Tank (recommended, not included):

Minimum 22ltr Air Receiver Tank - Recommended for proper operation of all functions.

Benefits

Free up to 8 cubic feet

VMAC Hydraulic 60 CFM air compressors free up to 8 cubic feet of vehicle space. Systems are designed and engineered to be compact for service trucks and applications where space is limited.

Reduce truck GVW by up to 110kgs

VMAC Hydraulic 60 CFM air compressors reduce truck GVW by as much as approx. 110 kgs. This is because VMAC designs systems with lightweight materials and integrated components. Less weight means you can carry more, while improving your fuel economy.

Maximise productivity with up to 60 CFM, 100% of the time

VMAC Hydraulic 60 CFM air compressors use patented rotary screw technology that can operate intermittently for smaller jobs, but are designed to run at 100% duty cycle without stopping, so operators don’t have to wait for their air compressor to fill up an air receiver tank. This maximizes tool performance and eliminates downtown by keeping operators working.

Videos

Videos coming soon.

Downloads

Hydraulic Driven mobile Air Compressor 40cfm and 60cfm  Hydraulic HD60 Brochure

Electric

In Development - Coming soon

Overview

In Development - Coming soon

Specification

In Development - Coming soon

Benefits

In Development - Coming soon

Videos

In Development - Coming soon

Downloads

In Development - Coming soon

Petrol Driven

The G30 is the most affordable petrol driven air compressor on the market.

WORK SMARTER, NOT HARDER

This rotary screw petrol driven air compressor is your equipment MVP for getting jobs done faster. Get on-demand air in the time it takes to walk from your van to your tool; no more waiting around for the air pressure to build. And with 30 CFM at 100% duty cycle, you can get through your jobs in less time and with no interruptions.

Whether your goal is to finish work faster to get home and relax, or squeeze in a few extra jobs before the end of the day, the VMAC G30 air compressor is able to handle your on-demand air requirements, every time. This petrol powered air compressor was designed with functionality and convenience in mind.

Overview

Petrol Driven skid mount mobile Air Compressor 30cfm

VMAC G30 petrol engine driven air compressors are the best choice for customers who need the lightweight, compact performance of a rotary screw air compressor, at the lowest price possible.

Rotary screw compressors have already proved their undisputed technical and performance superiority in almost all aspects over traditional reciprocating piston compressors.

The G30 is not only approximately half the price of other rotary screw air compressors, it is also price-competitive with similar CFM reciprocating compressors.

Specification

AIR COMPRESSOR Up to 30 CFM, 100% duty cycle, up to 150 psi, VMAC oil-injected rotary screw, belt driven.
ENGINE Honda GX390 air cooled 4-stroke OHV with electric start, EPA and CARB compliant, Honda approved application.

WEIGHT (WET) Approximately 205 lbs (93 kg)

DIMENSIONS
  • 23.9” (h) x 21.4” (w) x 33.5” (l) / 60.7cm (h) x 54.4cm (w) x 85.1cm (l)
  • Mounting Plate: 19.125” (w) x 25.0” (l) / 48.6cm (w) x 63.5cm (l)
THROTTLE CONTROL
2-speed throttle, responds to air demand
BATTERY Integrated ACDelco 12 V, 250 CCA, 310 CA

CONTROL SYSTEM
  • Key switch, choke, hour meter
  • Automatically idles down/up with air demand
  • Unloader decreases engine load, lowers sound levels, reduces fuel use and engine wear
SAFETY SYSTEM
  • Compressor thermal protection circuit
  • Automatic rapid blow-down valve on tank
  • 200psi pressure relief valve
  • Low engine oil pressure shutoff
 DECIBELS (dB) @20 FEET (6.1 METERS)  81 dB at high idle; 67dB at low idle
FUEL TANK CAPACITY
1.6 Gallons (6.1 Litres)
AIR RECEIVER TANK (RECOMMENDED FOR HIGH DUTY CYCLE APPLICATIONS IN HOT CLIMATES) 12-Gallon Low Profile Air Receiver Tank – 150 psi max, with gauge, fittings, hose and valves (adds 8.4” (21.3 cm) to height and 80 lbs (36 kg) to weight)

   

Benefits

30 CFM. 100% of the Time.

VMAC G30 gas driven air compressors include a patented 30 CFM rotary screw air compressor designed to produce full air power, 100% of the time, so you don’t need an air receiver tank. Get jobs done faster, without interruption. .

50% Lighter & Smaller

VMAC G30 gas driven air compressors are engineered and manufactured for mobile applications. VMAC air compressors feature the latest rotary screw technology integrated into a compact, turn-key package that is significantly lighter and smaller than any other competitive model. Fit more tools, equipment and supplies on your truck, without hassle.

Industry-leading Reliability

Engines supplied by Honda come with an industry-leading 3-year warranty and VMAC rotary screw air compressors come with the industry’s first Lifetime Limited Warranty. For peace of mind, without the headache.

Videos

Coming Soon .....

Downloads

Petrol Driven skid mount mobile Air Compressor 30cfm G30 Petrol Driven Air compressor Brochure

Diesel Driven

THE MOST INTELLIGENT MOBILE AIR COMPRESSOR AVAILABLE

The VMAC D60 diesel driven air compressor includes a patented direct-driven 60 CFM rotary screw air compressor designed to maintain max CFM 100% of the time, so operators don’t have to wait for their air compressor to fill up an air receiver tank. This maximizes air tool performance while providing maximum operator efficiency at the job site and eliminating downtime.

"The D60 delivers good power and is basically unstoppable! Just turn it on, do your job, and shut it off – it’s a no brainer.

You can’t compare it to a reciprocating compressor because they’re like apples and oranges – completely different.

The D60 is way more efficient! I get twice the work done in half the time." Highway Tire

Overview

D60 Diesel Driven skid mount mobile Air Compressor 60cfm

The VMAC diesel driven D60 air compressor is the best choice for customers who need the performance of a truck engine-driven air compressor, without running the truck.

Engine idle reduction is important to decrease emissions, save fuel and maintenance costs, and extend truck and equipment life. Another way VMAC reduces engine idling is with the most intelligent control system available, automatically shutting the compressor engines off when air isn’t needed, and restarting the compressor engine when air is needed.
  • Mobile heavy duty mechanics
  • Mobile tire service technicians
  • 24/7 roadside repair technicians
  • Remote jobsites (when skid-mounted)

Specification

Air Compressor Output: 60 CFM @ 100 psi (150 psi max)
Air Compressor Type: Direct-driven, 100% duty cycle, VMAC oil-injected rotary screw
Engine: Kubota Diesel D902 3-cylinder, naturally aspirated 3600 rpm, Tier 4 Final
Weight (wet): Approximately 450 lbs (204 kg)
Dimensions: 34.5” (l) x 18” (w) x 28” (h) ; 87.6 cm (l) x 45.7 cm (w) x 71.1 cm (h)
Decibels (dB) @ 20 feet (6.1 meters): 83 dB @ high idle; 76 dB @ low idle; 0 dB @ Standby Mode
Battery: AC Delco 12V, 460 CCA, 575 CA
Control System:
  • Easy to use digital control system with adjustable parameters
  • Remote mounted air compressor digital display box
  • With sustained periods of no air use, the control system will shut down the engine
  • Programmable auto restart in cold temperature or low battery voltage
  • Engine auto-restarts with air demand Data logging of error codes
  • Automated service reminders
  • 2-speed throttle, responds to air demand
Safety System:
  • Audible warning before system starts
  • Flashing light while system in Standby Mode
  • Automatic rapid blow-down valve on tank
  • 200 psi pressure relief valve
  • Engine and compressor over temperature shutdown
  • Low fuel warning with optional fuel tank
  • Air filter restriction warning
Cold Climate Protection:
  • Adjustable glow plug control.
  • Engine and compressor will wait till the temperatures are above 41°F (5°C) before loading and going into a running state.
  • Engine will automatically restart when system temperature falls below 23°F (-5°C); small heat strip included in LCD Digital Control Box.
  • Optional Cold Climate Model – Includes factory-installed 110VAC Cold Climate Heaters, tested to -40°F (-40°C); Battery jump-start connections for vehicle battery tie-in, will charge the vehicle batteries while running
Fuel Supply Options: (not included)
  • 7-Gallon tank with fuel gauge and low fuel shut-off sensor
  • External diesel fuel pump kit
Air Receiver Tank (recommended, not included): Minimum 6-Gallon Air Receiver Tank - Recommended for proper operation of all functions.

Benefits

60 CFM. 100% of the time.

The VMAC D60 diesel powered air compressor includes a patented direct-driven rotary screw air compressor designed to produce 60 CFM, 100% of the time, so operators don’t have to wait for their air compressor to fill up an air receiver tank. This maximizes tool performance and eliminates downtime. 

Decrease truck GVW by up to 350 lbs.

Weighing just 450 lbs, the VMAC D60 diesel driven air compressor is up to 350 lbs lighter than comparable air compressors. This is because VMAC designs systems with lightweight materials and integrated components. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your truck, carry more materials, or take advantage of better fuel economy.

Reduce truck idling.

What makes the VMAC D60 diesel air compressor so intelligent is the digital control system. The control system automatically idles the Kubota diesel engine up and down and turns it on and off with air demand. This means fewer emissions and less noise on the job site. And since the truck engine can remain off while using the air compressor, fleet managers can save on truck maintenance and fuel costs. Another important benefit of the advanced control system is built-in cold and hot climate protection, keeping the D60 running in most extreme climates. 

Save truck maintenance and fuel costs.

VMAC's powerful diesel driven air compressors reduce truck maintenance and fuel use by allowing you to turn your truck engine off while on the jobsite.  The control system not only automatically idles the compressor’s engine up/down with air demand, it also turns the engine off/on with air demand.  This function, along with the lightweight design of the diesel driven air compressor helps improves fuel economy while driving and on the jobsite.

Easy to use and service.

VMAC diesel air compressors are easy to use, access and service.  Systems can be integrated into the truck or can remain self-contained so they can be easily transferred from truck to truck.  Digital controls and LCD allow easy adjustment of system settings and provide service reminders to operators.

Reliable engine and compressor.

VMAC diesel driven air compressors work in extreme climates across North America with built-in cold/hot climate protection and an optional factory-installed cold climate kit.  Systems are powered by Kubota, the most reliable and common compact diesel engine on the market.   Patented direct-driven rotary screw air compressors are manufactured by VMAC, and include a VMAC Lifetime Warranty.

Videos

D60 Diesel Driven skid mount mobile Air Compressor 60cfm Getting to Know Your VMAC D60 Diesel Driven Air Compressor

D60 Diesel Driven skid mount mobile Air Compressor 60cfm  VMAC's D60 Diesel Driven Air Compressor Customer Testimonial

Downloads

D60 Diesel Driven skid mount mobile Air Compressor 60cfm  D60 Diesel Driven Air Compressor Product Brochure

Accessories

Techni Systems can offer a full range of pneumatic accessories for your Mobile Compressed Air System.

DropOut

Original Expel Drop Out99.9999% LIQUID AND PARTICULATE REMOVER

Dropout® is a unique, scientifically engineered, patent protected multi-stage Compressed Air Filter that removes 99.9999% of Liquid (Water & Oil) & 99 % solid particulates down to 1 Micron. This unique multi stage Compressed Air Filter requires NO Replacement Filters, and once fitted, the ongoing servicing costs are ZERO.

This unique multi-stage compressed air filters performance is constant regardless of flow rate, pulsed or stop/start. Compressed air is cleaned, dried and polished.
The premier solution for the removal of water and particulates from compressed air systems.

Filter Regulator Lubricator (FRL)

Mobile compressed air accessories

No need to expel water, all you need is an aftercooler!

The Techni Systems VR70 system incorporates an aftercooler to cool the air prior to filtration. Products to expel water from the system have severe performance issues as air temperature increases. As such, all that is required following the aftercooler is a quality FRL (Filter, Regulator, Lubricator). The FRL extends life of air tools; filter removes contaminants from the compressed air, adjustable regulator can reduce air pressure going to tools, and lubricator adds atomised tool oil to the air stream to lubricate air tools.

Specification

  • Maximum flow: Up to 70 CFM / 150 psi
  • Port size: 3/4" NPT inlet and outlet

Benefits

  • Extends life of air tools
  • Filter removes contaminants from the compressed air
  • Adjustable regulator reduces air pressure going to tools
  • Lubricator adds atomised tool oil to the air stream to lubricate air tools.

PCL Qube

Mobile compressed air accessories

The QUBE is a cost-effective and accurat tyre inflator and is designed to be simple and space-saving, without the programmability or customisation of the more expensive models. This versatile little unit is ideal for indoor use, particularly in commercial environments where ease of use and accuracy are key.

Specifications

  • Accuracy Exceeds EC Directive 86/217 (to +/- 0.5% of full scale reading)
  • Reading Accuracy 0.1 bar / 1 psi / 5 kPa
  • Maximum Inlet Pressure 15 bar / 217 psi / 1500 kPa
  • Inflation Flow 2,500 l/min (1)
  • Dimensions 150 mm x 150 mm x 92 mm
  • Weight 2.3 kg / 5.08 lbs

(1) - @ 10 bar supply

Benefits

  • Consistent cost effective provision of high levels of safe air inflation services
  • Low life time costs - long product life with robust design and proven electronics
  • Plug and play - tyre inflator with 3 pre-selectable application modes
  • Fits all applications - general, tyreshop and N2
  • Low and simple maintenance
  • Guaranteed accuracy with individual testing

Hose Reels

Hose Reel for Vehicle Conversion

This Steel Hose Reel is user friendly latch mechanism, allows a complete retraction every time with no lock-out.

The next level in industrial standard steel hose reels taken to another level, that we feel, makes it one of the best Steel Hose Reels available in the global market today.

Specifications

  • Maximum Working Pressure 300 psi / 21 bar
  • Media, Air or Water
  • Construction, Steel
  • Maximum Working Temperature 65°C / 149°F

Benefits

  • Industrial-grade kink resistant hose is a specially blended compound for use on reels
  • All steel components are individually corrosion resist powder coated and are combined with composite materials to virtually eliminate corrosion
  • The base and guide are made of heavy gauge pressed steel in to increase structural strength
  • Industrial grade brass swivel is precision machined to reduce hose stress for a high life cycle
  • The base has four slotted holes for easy mounting and adjustment enabling the reel to be mounted virtually anywhere

Run Lock / Key Out

These enable the vehicle to remain engine running, with the key removed from the ignition allowing the door locking control to be operated from outside the vehicle. These are ideal for vehicles that require power to auxiliary equipment when the vehicle is stationary.

Our Runlock Systems monitor many safety features via the CAN Bus system, automatically deactivating the engine if unauthorised vehicle movement is detected.

Benefits

  • Remove the key whilst the ignition is still running
  • Ensures maximum safety and security
  • Advanced security against unauthorised vehicle movement